3 in 1 Moving Head Light
A three-in-one moving head light is a versatile piece of stage lighting equipment. It can be used to create a wide range of effects, from washing to spot and beam.
Wash lights produce a wider beam of light, making them ideal for highlighting large surfaces. In contrast, beam lights produce the tightest ray of light and are often used for eye-catching aerial effects.
360W LED CMY CTO Beam Spot Wash Moving Head Light
The 3 in 1 moving head light is a versatile lighting solution that can serve as a beam, spot, or wash light. It uses a powerful LED light source and offers an impressive color palette. It also has a high-brightness lens that ensures that the audience can see your show clearly. In addition, it has an advanced CMY color mixing system that allows you to create a virtually unlimited number of colors.
Professional rental moving heads lights are an essential tool for event planners and other users looking to elevate their events or performances. These lights can be used to enhance the ambiance of any venue or room and create dynamic visuals that will mesmerize your audience. They also offer greater flexibility and creativity than other lighting solutions, making them ideal for events with specific themes or venues.
In addition, professional rental moving head lights are more convenient than purchasing equipment, as they can be delivered directly to your event site by a professional lighting company. They can also be rented Outdoor Wall Washer at a discounted rate compared to their retail price.
DMX Controlled
DMX is an electronic control protocol used for LED lights and other lighting-effects equipment. It sends bits of signal from a controller (also known as a dimmer) through a special cable called a CAT-5 (or 5) wire. These CAT-5 wires are typically connected to the ‘DMX In’ ports of the LED fixtures and the ‘DMX Out’ port on the lighting controller. This makes it possible to daisy-chain multiple LED devices together with ease and without a central controller.
Each DMX LED fixture has its own unique ‘DMX address’. These ‘addresses’ are used by the lighting controller to send instructions to each LED fixture in a chain. This allows the lighting technician to select specific colours for each LED light fixture, or set pre-programmed effects such as fading and dimming.
Each DMX LED device requires one channel for every adjustable colour it uses. For example, a single RGB LED fixture or lighting zone would need three of the 512 DMX channels available in a ‘DMX Universe’. This is because each adjustable colour (red, green, blue) requires a separate channel.
Easy to Set Up
The three-in-one moving head computer light is easy to set up. It is lightweight and portable, making it ideal for use on stages and in clubs. It also has a variety of features, including prism automatic adjustment and software with correction and positioning functions. This makes it easier to create patterns that can enhance the performance of your event.
The first step in setting up your waterproof moving head light is to establish electrical connections. This is important because many fixtures have specific voltage and current requirements that must be met to achieve optimal performance. If you are unsure about how to set up your fixture, it is best to consult with a professional technician or engineer to ensure that the connection is made properly and safely.
The next step is to choose a power source that meets the specifications of your waterproof moving head light. Some models require a specific voltage and current to operate, while others have adjustable settings for fine-tuning. Once your fixture is powered up, you can begin programming and adjusting the settings to create eye-catching lighting effects.
High-Brightness LED Light Source
LED lights are more efficient than traditional bulbs. They convert LED Strobe Mobile Light a higher percentage of electrical energy into light and emit less heat, which is important for maintaining a long life span since overheating is one of the most common causes of early failure in traditional bulbs.
LEDs also produce a more narrow beam pattern than traditional bulbs, making them ideal for use in flashlights and other portable devices where the shape of the radiation pattern is critical. They also offer a high degree of color accuracy, which is important for accurate rendering of objects’ tints, tones and shades.
Another advantage of LEDs is that they can be operated at any percent of their rated voltage, unlike traditional bulbs that are inefficient at lower power levels and may not operate at all at full power. However, they require DC (Direct Current) power, while most of the electricity in our homes and buildings is AC (Alternating Current), so they need to be powered by a converter. In addition, they do not last as long if the circuitry they are connected to is not of good quality.
Long Lifespan
The 3 in 1 moving head light has a long lifespan, making it an affordable option for your lighting setup. It is also lightweight and compact, allowing you to transport it easily. Its high brightness means that it can illuminate a large space.
There are three main types of moving head lights: wash, spot and beam. Wash lights create a wider wash of light, ideal for highlighting a specific area. Spot lights produce a tighter spot effect, which is great for creating a spot light show at stage productions. Beam lights produce a narrow ray of light in a cone shape, which is popular at nightclubs for eye-catching aerial effects.
Our range of 3 in 1 moving head lights includes a variety of sizes and features to suit your needs. They are available in a range of colours and come with a variety of effects, such as prisms and frost filters. They are suitable for a wide range of applications, including concerts and dance performances. They can be controlled via DMX, master/slave or RDM, making them easy to use for any event.
